หัวข้อ: Modifying Colt Gold Cup เริ่มหัวข้อโดย: nawin ที่ ธันวาคม 19, 2004, 12:39:36 AM Sawadee Krup Everybody,
I apologize for not being able to type in Thai krup. :-\ I have a Colt Gold Cup National Match (Series 80) that I would like to modify. My question is: would modification affect the value/price of the gun? And if I don't want to affect the value of this gun, what parts below should I not install? Thanks for your help krup. I truly appreciate it. Nawin :) Items that I plan to install: 1. Ed Brown memory groove beavertail grip safety 2. Ed Brown tactical extended safety 3. Ed Brown drop-in-maxi-well 4. Ed Brown drop-in bushing 5. Ed Brown two-piece guide rod assembly 6. Ed Brown standard magazine release with oversize button 7. Ed Brown hex head grip screw 8. Kings checkered slide stop 9. STI match trigger (black polymer) 10. Millet tritium front and rear sights for Colt Gold Cup 11. Wilson checkered frontstrap (wrap around) 11. Crimson Trace laser grip หัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: USP40 ที่ ธันวาคม 19, 2004, 01:06:58 AM If I were you I wouldn't do it specially if you live in Thailand but if you have no plan to sell it then go ahead.
หัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: Nakin ที่ ธันวาคม 19, 2004, 01:15:02 AM Hello ,
Someone told me that this model is no longer in current production lines or it is hard to find a brand new one now . According to your parts list , I think that you could switch to the factory original parts at anytime you would like to ...... except the Millet Tritium sights set , but I think that it will not affect the value . Just my 2 cents ;D I also have one , the parts which I replaced are the slide stop , 2 sides safety ( forgot the technical term ) and Haart guide rod . หัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: USP40 ที่ ธันวาคม 19, 2004, 08:22:49 AM อ้างถึง 1. Ed Brown memory groove beavertail grip safety You will need to cut the frameหัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: nawin ที่ ธันวาคม 19, 2004, 05:23:24 PM Thank you both of you krup! I truly appreciate your input. :)
I will put in the parts that will not require modification to the frame and will sell the beaver tail. Thanks again na krup, Nawin :) หัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: USP40 ที่ ธันวาคม 19, 2004, 10:25:40 PM Thank you both of you krup! I truly appreciate your input. :) You can use Wilson drop in grip safety without cutting the frame .http://www.wilsoncombat.com/a_beavertail_safeties_di.aspI will put in the parts that will not require modification to the frame and will sell the beaver tail. Thanks again na krup, Nawin :) หัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: SEK ที่ ธันวาคม 19, 2004, 10:41:27 PM โตะจายโหมดเลยนึกว่าเข้าเวปผิด
หัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: Zeus-รักในหลวง ที่ ธันวาคม 19, 2004, 11:15:47 PM :~) :~)อ่านไม่ออก.....ใจร้ายยยยยยย :~) :~) :~)
หัวข้อ: Re: Modifying Colt Gold Cup เริ่มหัวข้อโดย: Nakin ที่ ธันวาคม 20, 2004, 12:16:58 AM อ้างถึง 1. Ed Brown memory groove beavertail grip safety You will need to cut the frameThanks a lot for this important info . I really did not know about this before . :-[ |