แล้วจะฟอร์เวอร์ดพอร์ตของ HUEWAI MT800 ทำอย่างไรครับ
ผมเซ็ตเป็นRouterแล้วครับ
ตามนี้ครับ
Click the Other Settings link near the left side of the page.
You should now see a new menu. In this new menu, click NAT
Click the Add button
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Apache requires you to forward the 80,443 ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.
You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Rule - Add page. Go ahead and enter those settings and then click Submit.
Select REDIRECT from the Rule Type drop down box. Use the Protocol drop down box to select the protocol type of the ports you are forwarding. Enter the ip address to forward these ports to into the Local IP box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Leave Global Address From and Global Address To set to 0.0.0.0. Leave Destination Port From and Destination Port To set to Any Other Port. If you are forwarding a single port, enter that port number into the Destination Port From and the Destination Port To boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Destination Port From box. Then enter the highest number of that range into the Destination Port To box. When you are finished, click the Submit button.
Click the Advanced Function link near the left side of the page.
You should now see a new menu. In this new menu, click IP Filter.
Select Low from the Security Level drop down box. Select Accept from the Public Default Action drop down box. Select Accept from the Private Default Action drop down box.
When you're finished, click Save & Reboot near the left side of the screen to save your changes.
