ผมลอกมาจากคู่มือ ของ คิมเบอร์...แปลเผื่อผมด้วยนะครับ

Lubricate the following internal parts of the pistol
a.
Slide and Frame rails - Oil. Do not over oil !
b.
Disconnector on top of frame - Small drop.
c.
Barrel Hood - two drops, spread on hood.
d.
Barrel Locking lugs inside Slide and on Barrel - one drop each lug.
e.
Barrel Link - one drop behind link.
f.
Slide Stop pin - one drop , spread with finger.
g.
Outside of Barrel - Oil. Do not over oil , spread with fingertip.
h.
Cock Hammer - one drop in between the hammer and frame.
i. Assemble gun. Rack the Slide 5-6 times, dry fire , wipe off excess oil from gun.
j. Make sure , if you have stored the gun with oil in the barrel and chamber , that you run a dry patch through the barrel to clear it of theoil before you fire the gun.